Simplex wire rope clamp A4 stainless steel, with one screw for fastening
WN 5176 032 A4 stainless steel type 1
CBLCLMP-SIMPLEX-A4-D8
Register now and access more than 125,000 products
Wire rope 7x19 is recommended for use with wire rope clamp.
Not suitable for wire cable 1 x 19!
These products have not been designed and manufactured for lifting applications as part of lifting equipment or load-bearing equipment. Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC.
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 5176-032 |
Material | Stainless steel A4 |
Surface | Plain |
Suitable for rope diameter (d) | 8 mm |
Thread type x nominal diameter (d1) | M8 |
Height (h1) | 27 mm |
Width (b1) | 30 mm |
RoHS-compliant | Yes |
Last viewed
C 6.3 TX bit (1/4 inch)
Conical countersink assortment Ruko conical countersink set DIN 335 form C 90° VHM plain, 6 pcs.
Washer For screws with a heavy clamping sleeve DIN 7349, A4 stainless steel
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Countersunk head screw
Machine tap Speedtap 4.0-Uni/Inox, spiral-fluted For metric ISO thread DIN 13
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Carpenters' chisel half-length, heavy, ultra-strong
Taper-grooved dowel pin ISO 8745 steel plain