Single anchor point W-FAZ/A4 AP
Single anchor point W-FAZ/A4 AP
ANCPT-W-FAZ/A4 M16 AP 300
Register now and access more than 125,000 products
- 360° rotating anchor eye
- The integrated fall indicator on the anchor point indicates a fall
- Reduced force transmission to the structure through defined plastic deformation in the event of a fall
- Highly resistant to corrosion and weathering: The single anchor point is made from A4 stainless steel
- No additional fastening elements required
- Ready for use immediately after installation
- No torque wrench or setting tools required
- Observe the installation instructions and approval for the single anchor point
- With general construction permit Z-14.9-692
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of 3 persons in conjunction with personal protective equipment against falling
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The single anchor point may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12
Material | Stainless steel A4, 1.4401 |
Rod length | 300 mm |
Diameter | 16 mm |
Height | 300 mm |
Surface | Stainless steel FINISH |
Last viewed
Ducting clamp Part 2 – Heavy series
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
Work shorts
Sanding disc film Mirka Novastar
System workbench 2000 mm with 2 fixed workbench feet and drawer wall-mounted cabinet 8.6
Round head screw with square neck
System assortment 4.4.1, screwdriver gun 37 pieces
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagonal bolt with flange DIN 6921, A2-70 stainless steel, plain
Gummiklotz rechteckig For vehicle lifting platforms