Single anchor point W-FAZ/A4 AP
Single anchor point W-FAZ/A4 AP
ANCPT-W-FAZ/A4 M16 AP 400
Art.-no.
0838922401
EAN 4053479211725
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Fall protection system with integrated fall indicator for rapid installation in concrete. Drill hole, hammer in attachment point, job done!
- 360° rotating anchor eye
- The integrated fall indicator on the anchor point indicates a fall
- Reduced force transmission to the structure through defined plastic deformation in the event of a fall
- Highly resistant to corrosion and weathering: The single anchor point is made from A4 stainless steel
Notice
- No additional fastening elements required
- Ready for use immediately after installation
- No torque wrench or setting tools required
- Observe the installation instructions and approval for the single anchor point
- With general construction permit Z-14.9-692
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Product information
Datasheets(X)
Application area
- Suitable for securing up to a maximum of 3 persons in conjunction with personal protective equipment against falling
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The single anchor point may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12
Material | Stainless steel A4, 1.4401 |
Rod length | 400 mm |
Diameter | 16 mm |
Height | 400 mm |
Surface | Stainless steel FINISH |
Last viewed
1/4 inch bit holder, magnetic
Comfort FFP3 R D breathing mask - preformed 3M With Cool-Flow exhalation valve up to 30 times the threshold value
Shield clamps without feet
Wood screw, DIN 95 brass Raised countersunk head, slotted
Work trousers
EPS key
TIME-SERT® threaded bushing
Hexagonal bolt, imperial, UNC
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Circlip shape JV for bore