Single anchor point for concrete With 360° fixing bolt anchor
Single anch. point f. concrete w. conc. screw 360°
ANCPT-S-CO334-43-800
Register now and access more than 125,000 products
- 360° rotating anchor eye
- The integrated fall indicator on the anchor point indicates a fall
- Can be used as an intermediate or end/corner support (43 mm diameter) in safety harness systems
- Can be delivered in different rod lengths
- Reduced force transmission to the structure through defined plastic deformation in the event of a fall
- Resistant to corrosion and weathering: The single anchor point is made from stainless steel (at least grade A2)
- Anchoring of the single anchor point in concrete (minimum requirement C20/25) with Würth W-FAZ/A4 M10 x 90 fixing bolt anchor
- Fastening material is included in the scope of delivery (except mortar compound)
- Observe the installation instructions and approvals for the fasteners and single anchor point.
- European Technical Assessment (ETA) 20/0965
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in connection with personal protective equipment against falling
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The anchor may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12 using the specified fixing elements only
Material | Stainless steel A2, 1.4307 |
Rod length | 800 mm |
Diameter | 43 mm |
Suitable for use in the following materials | Concrete |
Height | 805 mm |
Surface | Stainless steel FINISH |
Last viewed
Work trousers
Door handle A 267
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Spring spiral fixing tool, universal The new spring coil fixing tool fixes the spring directly to the clamping jaw, thereby preventing the spring unscrewing during the clamping process
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
LED flexible strip
Eccentric fitting with flange
Double pipe nipple imperial thread
Half-height separator For W-SLB system storage box
Hexagonal bolt with shank