Single anchor point for concrete With 360° fixing bolt anchor
Single anchor point f. concrete w/ Fixanchor 360°
ANCPT-S-CO340-20-300
Register now and access more than 125,000 products
- 360° rotating anchor eye
- The integrated fall indicator on the anchor point indicates a fall
- Can be used as an intermediate or end/corner support (43 mm diameter) in safety harness systems
- Can be delivered in different rod lengths
- Reduced force transmission to the structure through defined plastic deformation in the event of a fall
- Resistant to corrosion and weathering: The single anchor point is made from stainless steel (at least grade A2)
- Anchoring of the single anchor point in concrete (minimum requirement C20/25) with Würth W-FAZ/A4 M10 x 90 fixing bolt anchor
- Fastening material is included in the scope of delivery (except mortar compound)
- Observe the installation instructions and approvals for the fasteners and single anchor point.
- European Technical Assessment (ETA) 20/0965
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in connection with personal protective equipment against falling
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The anchor may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12 using the specified fixing elements only
Material | Stainless steel A2, 1.4307 |
Rod length | 300 mm |
Diameter | 20 mm |
Suitable for use in the following materials | Concrete |
Height | 305 mm |
Surface | Stainless steel FINISH |
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Adjustable T-shaped sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hammer head bolt with square neck DIN 186, A2 stainless steel, plain
Threaded rod DIN 976, steel 4.8, plain, shape A
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Key, high profile DIN 6885, steel, plain, shape AB
Hexagon nut, heavy-duty design, inch
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3789
Die For standard metric ISO thread HSCo Multi Performance