Single anchor point for gluing in rigid 360°
Single anchor point for gluing in rigid 360°
ANCPT-S-CO216-W-BAP 1
Register now and access more than 125,000 products
- Quick and easy anchor point installation and removal
- Saves space
- Single anchor point can be anchored in concrete (minimum requirement C20/25) using Würth injection system WIT VIZ
- Fastening material is included in the scope of delivery (except mortar compound)
- Product 0838906216, 0838906396 and 0838906397 with anchor rod W-VIZ/A4
- Product 0838906215, 0838906398 and 0838906399 with female thread anchor W-VIZ-IG/A4
- Observe the installation instructions and approvals for the fastening material and single anchor point!
- European Technical Assessment (ETA) 20/0965 for the products 0838906396, 0838906397, 0838906398, 0838906399
- DIBt National technical approval for the products 0838906215, 0838906216
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in conjunction with fall protection PPE
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The anchor may be used in reinforced or non-reinforced standard concrete of a strength class of at least C20/25 and at most C50/60 in accordance with EN 206:2000-12 using the specified fixing elements only
Material | Hardened steel |
Suitable for use in the following materials | Concrete |
Height | 80 mm |
Colour | Yellow |
Last viewed
Hexagonal bolt with shank
Engine adjustment clamping tool
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Ratchet lashing belt, one-part, with standard ratchet
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Ducting clamp Part 2 – Heavy series
1/2 inch impact socket wrench insert, extra long set 3 pieces
Hexagonal bolt with thread up to head
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain