Single anchor point for steel Screw-in, rigid
Single anch. point f. steel for screwing in rigid
ANCPT-S-ST219-W-BAP
Register now and access more than 125,000 products
- Quick and easy anchor point installation and removal
- Space-saving
- Anchoring of single anchor point to metal structures with machine screw included in the set (machine screw V4A M16 x 60)
- Mounting material (machine screw V4A M16 x 60) is included in the scope of delivery
- Observe the installation instructions and approvals for the fasteners and single anchor point.
- The substrate requires static dimensioning according to technical building regulations
- DIBt National technical approval Z-14.9-692
- Also certified in accordance with DIN EN 795:2012 Type A (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Datasheets(X)
- Suitable for securing up to a maximum of three persons in conjunction with fall protection PPE
- The single anchor point can be used for routine work in areas with fall hazards, such as maintenance and assembly work on flat roofs etc.
- The single anchor point may be installed on metal structures using the specified fixing elements only
Material | Stainless steel A4, 1.4401 |
Suitable for use in the following materials | Steel |
Height | 80 mm |
Colour | Grey |
Last viewed
O-ring, metric
Safety boots, S3
Extension set For electric sheet metal nibbler
ORSY®BULL partition element basic set For dividing ORSY®BULL top loader boxes according to requirements
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
STARLINE® waist jacket
Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
Slotted cheese head DIN 84, A4 stainless steel, plain
1/2 inch socket TX IP