Single anchor point load substrate
Single anchor point load substrate
ANCPT-APPLIED-LOAD-SUBSTRATE-S498
Register now and access more than 125,000 products
- Penetration-free anchor point in accordance with DIN EN 795 type E or for use as a single anchor point or in a rope system
- Load due to gravel, sand or substrate filling
- Reinforcement of the fleece with 4 aluminium profiles
- Support heights 300-800 mm
- In a rope system for securing a maximum of 2 persons
- As a single anchor point for securing a maximum of 1 person
- Spacing in rope system up to max. 12 m
Intended for temporary use. Additional freight costs are incurred for shipping due to bulk goods.
DIN EN 795, type E
Single anchor point and start, end or corner support for load-bearing temporary rope system
EN standard | 795 |
Material | Stainless steel/aluminium |
Width | 3 m |
Height | 70 cm |
Length | 3 m |
Datasheets(X)
Last viewed
Hexagon bolt with thread up to the head ISO 4017, A2-80 stainless steel, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, plain
ASME B18.6.3 stainless steel 18-8 slotted UNC
EPS profile double cylinder
Work dungarees Planam Highline
3KS Plus profile double cylinder for keyed alike profile cylinders in original equipment
Twist drill bit, metal Ruko DIN1896 HSS-G plain
GEFU® thread-rolling screw with Taptite 2000® thread, flat head with hexalobular drive
Dry abrasive paper roll wood KP perfect KP perfect
