Single-sided tooth plate connector type C11

Name: Single-sided tooth plate connector type C11
Brand: Würth
SKU: 045103165

Wood connector/ press-in anchor type C11
DWL-EN912-C11-ONESIDED-(A4K)-D65/17MM

Art.-no. 045103165

EAN 4011231386081

All versions

Similar products

Prices for customers after login

Single-sided tooth plate connector type C11

Art.-no. 045103165

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Single-sided tooth plate connectors (type C11) are used for metal-wood or wood-wood connections (softwood) in combination with bolts or wood screws to absorb shear forces. The bolts or screws subject to load absorb the clamping and tensile forces in the bolt axis.

In line with DIN EN 912:2011-09

Material: Malleable iron EN-GJMB-350-10 in line with DIN EN 1562

Surface: Galvanised, A4K

Application in utilisation classes 1 and 2

Notice

Transverse load in the compressed surfaces should not be higher than 2.5 N/mm² for solid wood or 3 N/mm² for laminated wood.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

CE marking in line with EN 14545:2008

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Used to manufacture double-shear, shear-loaded metal–wood and wood–wood connections made from softwood, e.g. half-lap joints, frame corners and collar beams.

Instructions

Single-sided tooth plate connectors type C11 are attached using dowel pins and nuts. Bolts with washers are suitable fasteners.

Assembly

1. Bore a hole for the bolt and nut in the timber component. The bore diameter for bolts in wood may only be max. 1 mm larger than the nominal diameter of the bolt. The bolt must rest against the metal tab and against the tooth plate connector.

2. Position the single-sided tooth plate connector in the timber component. These can be embedded to prevent a gap between the components. It is not permitted to drive in the connector by hitting the teeth directly.

3. Drive in the tooth plate connector by tightening the bolt torque or using a hydraulic driving tool. Alternatively, special driving tools can be used.

4. Tighten the bolts if the wood cross-section tapers.

Type	C11
Design	One side
Nominal diameter	65 mm
Diameter of hole	16.5 mm
Thickness	3 mm
Height	15 mm
Number of teeth per circle and side	14 PCS
Material designation	EN-GJMB-350-10
Surface	Zinc plated
Material	Malleable cast iron
EN standard	912

Additional accessory:

Product

Description

Quantity

Price
/PU

Metric double open-end wrench DIN 3110/ISO 1085

DBOPNENDSPN-WS24X26

ZEBRA

Art.-no. 0713304246

ZEBRA® professional-quality tools in a wide range of sizes

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).