Single-sided tooth plate connector type C2
Wood connector/ press-in anchor type C2
DWL-EN912-C1-ONESIDED-(SZN)-D62/12MM
Register now and access more than 125,000 products
- In line with DIN EN 912:2011-09
- 2 nail holes, d = 3.5 mm
- Material: St 1203 or DC 01 + C390 steel in line with DIN EN 10139
- Surface: Sendzimir galvanised
- Application in utilisation classes 1 and 2
Transverse load in the compressed surfaces should not be higher than 2.5 N/mm2 for solid wood or 3 N/mm2 for laminated wood.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
CE marking in line with EN 912 pending.
Datasheets(X)
Used to manufacture double-shear, shear-loaded metal–wood and wood–wood connections made from softwood, e.g. half-lap joints, frame corners and collar beams.
Single-sided tooth plate connectors, type C2, are attached using dowel pins and nuts. Alternatively, ASSY wood screws can be employed. Suitable fasteners: Bolts with washers and ASSY 3.0 Combination screw.
Assembly
1. Bore a hole for the bolt and nut in the timber component. The bore diameter for bolts in wood may only be max. 1 mm larger than the nominal diameter of the bolt. The bolt must rest against the metal tab and against the tooth plate connector.
2. Position the single-sided tooth plate connector in the timber component. The tooth plate connectors can be fixed in place using the nail holes. It is not permitted to drive in the connector by hitting the teeth directly.
3. Drive in the tooth plate connector by tightening the bolt torque or using a hydraulic driving tool. Alternatively, special driving tools can be used.
4. Tighten the bolts if the wood cross-section tapers.
Type | C2 |
Design | One side |
Nominal diameter | 62 mm |
Diameter of hole | 12.4 mm |
Thickness | 1.2 mm |
Height | 8.7 mm |
Number of external teeth | 12 PCS |
Nail-hole diameter | 3.5 mm |
Material designation | HX340LAD |
Surface | Hot dip galvanized |
Material | Sheet steel |
EN standard | 912 |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
High-visibility work dungarees
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Oval-head screws with H cross recess DIN 7985, steel 8.8, plain
Countersunk tapping screw type C with H recessed head ISO 7050, shape C, zinc-plated, blue passivated (A2K), with H cross recess
Bodywork saw blade with SIG adapter
Stretch X softshell jacket
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Safety shoe S1
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head