Skeleton key for 5-pin NP bearing cylinder
Skeleton key for bearing cylinder
SKLTNKEY-F.PRFLCYL-NP-GS1
Register now and access more than 125,000 products
- Material: nickel silver
- Suitable for all keyed alike 5-pin NP profile cylinders from Würth
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Nickel silver |
Closure | GS 1 |
Key number | S 55682 |
Length | 59.4 mm |
Nominal diameter | 23.8 mm |
Last viewed
Square split spindle 10 mm offset on both sides to 8 mm
Winter protective gloves Ansell PowerFlex® 80-400
Roll-in sliding block with guide bar
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Slotted set screw with tip DIN 553, A4 stainless steel, plain
Universal protector GPN 620 Polyethylene (PE-LD), yellow
Hexagonal bolt with flange
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Screw seal, self-centring
HPC Speedcut 4.0 Universal end mill, long, optional, four blades, uneven angle of twist gradient DIN 6527L, HB shank