Skin protection foam
Skin protection foam
SKINPROTFM-CAN-200ML
SKIN
Register now and access more than 125,000 products
Effective protective film between skin and penetrating substances
- Prevents adhesion of dirt through dirt-bonding emulsifiers
- Waterproof
Forms a dry, elastic, touch-proof protective film
- Non-slip gripping of tools
- Leaves no annoying residue on workpieces or tools
Simplifies skin cleaning
Therefore prevents use of improper skin cleaning agents as a major contributor to many skin diseases.
Leaves skin feeling pleasant
- Natural skin functions such as perspiration, breathing and sensitivity all remain unimpaired.
- Liposomes improve moisture storage and surface structure of the skin.
Food safe
Dermatologically tested
This product is not a substitute for any prescribed protective measures such as gloves or similar items.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Provides protection when working with ink, paint, solvents, weak acid, bases, adhesives, lacquers, oil, grease, tar, bitumen products, cement, lime and soot.
Shake the can before use. Spray the foam on to clean palms before starting work, rub in and wait a moment for it to be absorbed.
Contents | 200 ml |
Container | Aerosol can |
Smell/fragrance | Characteristic |
Colour | White |
Chemical basis | Water tenside |
Performance (points system) | 3 of 5 points |
pH value / conditions | 8.5 / at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Spiral wire 7-pin 24V With plastic connector
TX bit C 6.3 (1/4 inch) with hole
EPS key
Designer furniture handle D handle
System insert, unprocessed foam
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Long plate pair ZD oval Without handle hole
System box
Internal spring tensioner set
Replacement foot For aluminium ladders