Sledgehammer Halder Supercraft sledgehammer Series 3366
Supercraft sledgehammer Halder series 3366
SLEDGEHM-HALDER3366.110-SUPERCRAFT-D100
Art.-no. 1971008290
EAN 4030618303879
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT sledgehammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT sledgehammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Vibration-damping, ergonomically shaped, highly robust and painted hickory handle.
- Protective shaft sheath prevents missed strikes.
- Long handle and hammer inserts can be replaced.
Datasheets(X)
Hall construction/steel construction/exhibition stand construction, loosening concrete formwork, scaffolding/tents, fencing, driving in splitting wedges, straightening, maintenance tasks
Hammer head insert diameter | 100 mm |
Material of long handle | Hickory |
Material of hammer head insert | Nylon |
Length of handle | 900 mm |
Length | 1000 mm |
Last viewed
Steel spacer stud
pias® drilling screw, raised countersunk head with AW drive
Hexagonal bolt with thread up to the head ISO 4017, natural polyamide 6.6
Wiring duct, halogen-free
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
Lashing eye
Work dungarees Planam Tristep
Stretch X winter softshell jacket
Hexagon nut ISO 4032 A4-70 stainless steel, plain
Semi-orthopaedic insoles