Sleeve EN1254, gunmetal, 3270
EN1254 gunmetal 3270
FITT-MUFFE-EN1254-IG-ROTG-1/2ZO/3270
Register now and access more than 125,000 products
- For universal use in various areas of application
- Complies with many different international certification systems such as DVGW, KIWA and SVGW
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight %
The drinking water purification is confirmed by the DVGW type examination certificate DV-7401AS2289 and by the Austrian conformity registration certificate no.: R-15.2.3-20-17025.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Compressed air
- Systems for distributing technical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, DIN 14462
- Sprinkler systems VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 1/2 in |
Nominal diameter 2 | 1/2 in |
Length (a) | 30 mm |
Length 4 (Z/Za) | 4 mm |
Connection thread | R 1/2 inch |
Connection type | 1. connection cylindrical female thread (Rp), 2. connection cylindrical female thread (Rp) |
Material | Red bronze - gunmetal |
Surface | Plain |
Standards | DIN 1254 |
Last viewed
HSCo Multi Performance combination tap
Twist drill bit HSS DIN 1897 type RN
HSCo8 AlCrN annular cutter
Wood screw, DIN 96 A2 Half moon head with slot
PVC insulating hose
Protective glove, winter
Silicone acetate
Magazine For QUADRO wire-stripping and crimping pliers
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
ASSY®plus 4 A2 P CSMR60 wood façade screw A2 stainless steel plain partial thread with underhead thread countersunk head 60°