Sleeve, reduced with female and male thread EN10242 M4, hot-dip galvanised malleable iron
EN10242 M4 reduced mall. cast iron hot dip galv.
FITT-SLEV-EN10242-M4-V-R2X1
Register now and access more than 125,000 products
Datasheets(X)
 | |
Connection thread (d1) | R 2 inch |
Material | Malleable cast iron |
Surface | Hot dip galvanized |
Connection thread 2 (d2) | R 1 inch |
DIN | 10242 |
Length (a) | 70 mm |
Length 4 (z1) | 46 mm |
Width across flats (s1) | 0 - not applicable |
Width across flats 2 (s2) | 0 - not applicable |
Last viewed
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9, plain
Colour pin nail colour
Work trousers
Full-vision goggles Honeywell® Maxx Pro
Hose clamp set, strap width: 12 mm 111 pieces
Hammer drill bit Max Quadro-L Vario
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Centre-grooved dowel pins ISO 8742 steel plain
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal