Slidebox H135 pot drawer
Front pull-out Slidebox H135 set packaging
FRMSYS-SLIDEBOX-KIT-H135-GREY-350
Register now and access more than 125,000 products
- Screw-on bar
- With integrated damping system
- Integrated height adjustment ±2 mm and side adjustment 1 mm
Tested over 60,000 cycles
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Nominal height | H135 |
Nominal length | 350 mm |
Material | Steel |
Surface | Epoxy coating |
Colour | Grey, similar to RAL 7042 |
Load capacity at 60,000 cycles | 35 kg |
Pullout type | Full extension |
Opening/closing system | Soft-close |
Lateral adjustment | +/- 1 mm |
Height adjustment | +/- 2 mm |
| NL | BL | MET drawer | MET inset drawer |
| 270 mm | 246 mm | 280 mm | 285 mm |
| 300 mm | 276 mm | 310 mm | 315 mm |
| 350 mm | 326 mm | 360 mm | 365 mm |
| 400 mm | 376 mm | 410 mm | 415 mm |
| 450 mm | 426 mm | 460 mm | 465 mm |
| 500 mm | 476 mm | 510 mm | 515 mm |
| 550 mm | 526 mm | 560 mm | 565 mm |
Installation tip:
| |||
| Legend | |||||
| LWK | Clear width of cabinet | BL | Base length | FAS | Front overlay, side |
| MET | Minimum installation depth | RWB | Back panel width | KV | Front edge of cabinet |
| BB | Base width | RWH | Back panel height | RS | Return |
Last viewed
13057 3M Scotchlite reflective tape Black/yellow, partially reflective
Tile levelling plate
Work trousers
Locking system DUAL
Die For standard metric ISO thread HSCo Multi Performance
Thread die HSS DIN EN 22568 for standard metric ISO threads
TIPP® Smartlock GS pipe clamp
Disposable protective clothing
Work dungarees
Low-cut safety shoes, S2