Sliding sleeve, with solder connection on both sides EN1254, copper, 5270S
EN1254 copper 5270S
FITT-SLEV-EN1254-ILE-CU-12/5270S
Register now and access more than 125,000 products
- Universally usable in various areas of application such as shipbuilding, mechanical engineering and apparatus construction
- Meets the requirements of various DVGW regulations
- Other certification institutes too such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by DVGW type test certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal transition fittings). This is also confirmed by ÜA registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Pneumatic
- Equipment for the distribution of technical and medical gases
- Rain water utilisation systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 12 mm |
Nominal diameter 2 | 12 mm |
Length (a) | 19 mm |
Connection type | 1. connection internal soldering |
Material | Copper |
Surface | Plain |
Last viewed
Tungsten carbide bur Klingspor HF 100 F
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Tripod adapter 28 mm / 30 mm (DIN 14640) For LED wide-area lights
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Safety boots, S3
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Metal core drill bit Ruko solid carbide Tecrona thread holder
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Round head screw with square neck DIN 603, steel 8.8, zinc-plated, yellow chromated (A3C)