Sliding sleeve, with solder connection on both sides EN1254, copper, 5270S
EN1254 copper 5270S
FITT-SLEV-EN1254-ILE-CU-35/5270S
Register now and access more than 125,000 products
- Universally usable in various areas of application such as shipbuilding, mechanical engineering and apparatus construction
- Meets the requirements of various DVGW regulations
- Other certification institutes too such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Suitability for drinking water is confirmed by DVGW type test certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal transition fittings). This is also confirmed by ÜA registration certificate no. R-15.2.3-20-17025 for 4000 series and R-15.2.3-20-17026 for 5000 series.
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations, technical rules for LPG (TRF)
- Heating oil supply systems DIN 4755 (TRÖ)
- Hot water heating DIN EN 12828
- Local and district heating lines DIN 4747
- Thermal solar systems
- Water-based room cooling systems
- Refrigeration equipment (ACR)
- Pneumatic
- Equipment for the distribution of technical and medical gases
- Rain water utilisation systems DIN 1989
- Fire-extinguishing pipes "wet" DIN 14462
- Sprinkler systems "wet" VdS CEA 4001
- Industrial and process water
- Wastewater pumping stations
 | |
Nominal diameter | 35 mm |
Nominal diameter 2 | 35 mm |
Length (a) | 48 mm |
Connection type | 1. connection internal soldering, 2. connection internal soldering |
Material | Copper |
Surface | Plain |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Lock washer For cheese head screws DIN 7980, steel with mechanically applied zinc coating
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Low-cut safety shoes S1P
V-belt spray
Hexalobular-type cheese head screw, low head
Twist drill bit HSS DIN 338 type RN 130°
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
