Sling swivel with joint
Sling swivel steel, GK10 with joint
ATTCHSWIV-360-(1T)-M12X18
Register now and access more than 125,000 products
- Safety factor 4 in all load directions
- Can be rotated 360°
- Can be screwed on using a combination wrench
- Crack tested to 100%
- Quality class QC 10
The sling swivel must always be fully screwed into the component. With axial tension, a deviation of +/-5° with a reduction in load-bearing capacity by 10 % is permitted.
- Suitable for safe lifting of loads in accordance with Machinery Directive 2006/427EG
- Designed, tested and certified in accordance with GS-OA 15-04 - EN 1677
- Designed for a load of 20,000 load changes
Datasheets(X)
Load-carrying capacity | 1 t |
Thread type x nominal diameter (d1) | M12 |
Thread length (l1) | 18 mm |
Material | Steel |
Surface | Plain |
Internal diameter (d2) | 28 mm |
Bracket width (d3) | 56 mm |
Body height (h3) | 35.5 mm |
Interior height (h2) | 40 mm |
Height (h1) | 99 mm |
Bracket diameter (s1) | 14 mm |
Thickness (b1) | 11 mm |
Diameter of contact surface (d4) | 30 mm |
Internal drive (is) | HS7 |
Max. torque | 25 Nm |
Product weight (per item) | 375 g |
Last viewed
Diamond dry core drill bit 1 1/4 inch
Pan head screw with Z cross recess DIN 7985, A4-70 stainless steel, plain
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Identification rings, PVC
FPM/ECO/AR/ECO petrol hose with low permeation for fuel-carrying applications
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
Triangular file DIN 7261, shape C
Repair hose line, NBR/textile For non-fuel-carrying applications
Contact spray SW
Work jacket