Slotted countersunk head screw ISO 2009, polyamide 6.6 natural
ISO 2009 polyamide 6.6 nature
SCR-CS-ISO2009-PA6.6-SL-M2,5X16
Register now and access more than 125,000 products
ISO 2009 replaces DIN 963 | There is some limited similarity | some head heights and head diameters changed | thread lengths changed | strength class 8.8 removed | nominal Ø
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2.5 |
Length (l1) | 16 mm |
Head diameter (dk) | 4.7 mm |
Head height (k1) | 1.5 mm |
Standards | ISO 2009 |
Material | PA - Polyamide |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Head details | 0 - not applicable |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.45 mm |
Thread form | Standard metric thread |
Design | 0 - not applicable |
Product class | A |
Area of application | 0 - not applicable |
Regulated area | 0 - not applicable |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Last viewed
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
ASME B18.6.3 steel hex. washer hd zinc-pl.
System insert, plastic, 8.4.1
Designer glass shelf support With rubber cover
Cable tie tightening pliers, pneumatic Extra-wide
Stud with threaded end ≈ 2d
Hexagonal bolt with flange in accordance with MBN standard
Tool head, small design For crimping pliers
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Taper-grooved dowel pin ISO 8745 steel plain