Slotted flat-head screw DIN 85, brass, nickel-plated (E2J)
DIN 85 brass nickel plated
SCR-PANHD-DIN85-BRS-(E2J)-M3X8
Register now and access more than 125,000 products
DIN 85 has been withdrawn and replaced by ISO 1580. There is some similarity (nominal Ø M1.2, M2, M2.5 added | some head heights and head diameters changed | strength class 8.8 omitted).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 8 mm |
Head diameter (dk) | 6 mm |
Head height (k1) | 1.8 mm |
Standards | DIN 85 |
Material | Brass |
Surface | Nickel plated |
RoHS-compliant | Yes |
Head type | Flat head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.5 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Colour – blind rivets Round pan head
Cylindrical pin, female thread, unhardened ISO 8733 stainless steel 1.4305
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Threaded fuse MIDI
External puller, triple leg, adjustable
Safety boots, S3
Hexagonal cap nuts, high profile DIN 1587, polyamide 6.6, natural
Hole saw with countersink bit
Safety shoe S1
Engine turning unit Scania For the cut-out provided for manual, precise cranking of the engine