Slotted headless screw with flat point DIN 427, A1 stainless steel, plain
DIN 427 plain A1 stainless steel
SCR-HDLESS-DIN427-A1-SL-M4X30
Register now and access more than 125,000 products
DIN 427 has been withdrawn and replaced by ISO 2342. There is some similarity (Nominal size M1.4 removed | Nominal sizes over M10 removed | Hardness class 45 for steel added | Hardness classes for stainless steels introduced | Standard title of slotted headless screw and flat point on slotted set screw with shank changed).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 30 mm |
Thread length (metric thread) (b1) | 4.8 mm |
Standards | DIN 427 |
Material | Stainless steel A1 |
Property class | 50 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shape of tip | Flat point |
Last viewed
Plastic end cap, square For square pipes
Half-length taper grooved pin ISO 8745 A1 stainless steel plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Eye bolt with full thread DIN 444, steel 4.6, plain, shape LB
Disposable protective suit Coverstar CS503
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
1/4-inch socket wrench insert For TX screws
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain