Slotted headless screw with flat point DIN 427, steel, 14H, plain
DIN 427 steel 14H plain
SHR-SCHAFT-DIN427-14H-SZ-M6X40
Register now and access more than 125,000 products
DIN 427 has been withdrawn and replaced by ISO 2342. There is some similarity (Nominal size M1.4 removed | Nominal sizes over M10 removed | Hardness class 45 for steel added | Hardness classes for stainless steels introduced | Standard title of slotted headless screw and flat point on slotted set screw with shank changed).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 40 mm |
Thread length (metric thread) (b1) | 7.2 mm |
Standards | DIN 427 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Partial thread |
Last viewed
Extension, tap wrench Ruko threaded hole extension DIN 377 Ruko
S3 safety shoe Heckel Maccrossroad3.0 low Boa
Dispenser
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Slotted raised countersunk head screw DIN 964, steel 4.8, plain
Roofing screw EUROFAST® EDS-SRB
CORNERSTONE MAXX corner cabinet pull-out carousel fitting set
Drill bushing DIN 179, steel, plain, shape A
Flat head drilling screws with recessed head and self-tapping screw thread
Sanding disc, fleece Klingspor NDS 400