Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
ISO 2010 A2 stainless steel, plain
SCR-RSDCS-ISO2010-A2-SL-M6X45
Register now and access more than 125,000 products
ISO 2010 replaces DIN 964 | There is some limited similarity | Some head heights and head diameters have been changed | Thread lengths changed | Strength class 8.8 omitted | Nominal diameter for
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 45 mm |
Head diameter (dk) | 11.3 mm |
Head height (k1) | 3.3 mm |
Standards | ISO 2010 |
Material | Stainless steel A2 |
Property class | 50 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Raised countersunk head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Product class | A |
Last viewed
Universal holder C 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
Safety boots, S3
Aerator inner part, water-saving limiter
Twist drill bit HSCo DIN 1897 type RN MAGMA
AL 900 door handle on outer plate With CK punch
Locking sleeves for injector bore
Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 720NF/80
Rubber module, large
Round head screw with slot and nut W-0231, steel 4.8, zinc-plated with nut, slotted
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened