Slotted set screw with pin DIN 417, A1 stainless steel, plain
DIN 417 plain A1 stainless steel
SCR-DOGPT-DIN417-A1-SL-M4X8
Register now and access more than 125,000 products
DIN 417 has been withdrawn and replaced by EN 27435. There is some similarity (no application-relevant changes).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 8 mm |
Diameter of tenon (d2) | 2.5 mm |
Length of tenon (l2) | 2 mm |
Slot width (n1) | 0.6 mm |
Standards | DIN 417 |
Material | Stainless steel A1 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Flat gasket Aramid fibre AFM 34
Rubber block, square For vehicle lifting platforms
Wire cable terminal With fork
1/4 inch socket wrench insert, metric short
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
Work overall
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Seat cutter For spark plug threads
Work dungarees