Slotted set screw with pin DIN 417, steel, 14H, plain
DIN 417 steel 14H plain
SCR-DOGPT-DIN417-14H-SL-M8X16
Register now and access more than 125,000 products
DIN 417 has been withdrawn and replaced by EN 27435. There is some similarity (no application-relevant changes).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 16 mm |
Diameter of tenon (d2) | 5.5 mm |
Length of tenon (l2) | 4 mm |
Slot width (n1) | 1.2 mm |
Standards | DIN 417 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | 0 - not applicable |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Last viewed
Twist drill bit, metal Ruko DIN 338 HSS-G plain 130° inch
Hexagonal bolt with shank and fine thread
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain
Bodywork washer made of uncoated steel in accordance with DIN 522
Stretch X ladies' trousers
Cable ties with metal latch closure, heat-stabilised – industrial quality
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain
Hexagonal bolt
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)