Slotted set screw with ring cutter DIN 438, plain 14H steel
DIN 438 steel, 14H, bare
SCR-RGCTR-DIN438-14H-SL-M8X20
Art.-no. 0253200820
EAN 4046778707877
Register now and access more than 125,000 products
DIN 438 has been withdrawn and replaced by EN 27436. There is some similarity (no application-relevant changes).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M8 |
Length (l1) | 20 mm |
Diameter of tenon (d2) | 5 mm |
Slot width (n1) | 1.2 mm |
Standards | DIN 438 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Eye bolt DIN 444, steel 4.6, plain, shape B
Split pin DIN 94, plain brass
Drawer cabinet PRO
ASME B18.2.6 steel A325 plain
Slotted cheese head DIN 84, steel 4.8, plain
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)
Crimp cable lug, ring connector PVC-insulated
Safety knife Martor Secumax Latex 99642.00
Hexagon nut, inch ASME B18.2.2, plain GR5 steel, UNC (comparable with ISO metric thread)
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal