Slotted set screw with ring cutter
DIN 438 steel, 14H, bare
STUD-RGCTR-DIN438-14H-SL-M3X6
Register now and access more than 125,000 products
DIN 438 has been withdrawn and replaced by EN 27436. There is some similarity (no application-relevant changes).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 6 mm |
Diameter of tenon (d2) | 1.4 mm |
Slot width (n1) | 0.4 mm |
Standards | DIN 438 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.5 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Chip ejection adapter
Centre drill bit
Three-punch expander pliers Three-punch pliers
Elastic belt tool set, 2 pieces for Ford/Volvo/Mazda 1.2-1.4-1.6L
Akura 44 profile thumbturn cylinder
S1PS safety sandals BIG RUNNEX® FlexStar 5116
1/2 inch socket wrench insert metric, hexagon, short
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
O-ring, metric
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)