Slotted set screw with ring cutter
DIN 438 steel, 14H, bare
STUD-RGCTR-DIN438-14H-SL-M4X40
Register now and access more than 125,000 products
DIN 438 has been withdrawn and replaced by EN 27436. There is some similarity (no application-relevant changes).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 40 mm |
Diameter of tenon (d2) | 2 mm |
Slot width (n1) | 0.6 mm |
Standards | DIN 438 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Wood screw, countersunk head DIN 97 Countersunk head, slotted
Abrasive cloth roll Mirka Alox
Identification rings, PVC
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Starlock Max knife
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Crimp cable lug, pin shape DIN 46230 and similar
Spring lock washer DIN 137, bronze, plain, shape A, curved
Case insert for MASTER/M-CUBE power tools
O-ring, metric