Slotted set screw with tip DIN 553, steel, 14H, plain
DIN 553 steel 14H plain
SCR-CONEPT-DIN553-14H-SL-M4X10
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
System drawer cabinet 16.8: 1037x770 mm
Threaded rod DIN 976, A2-70 stainless steel, shape A
Neon high-visibility softshell jacket, class 3
S3L safety boot Uvex1 XCraft 6804
Work dungarees
Hexagon head bolt with shank and fine thread ISO 8765, steel 12.9, plain
Low head hexagon head bolt in hygienic design
Roll-in sliding block with guide bar
Workbench BASIC WUS 1
HSCo type N double-cut side and face milling cutter DIN 885A
