Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
DIN 553 steel 14H zinc plated
SCR-CONEPT-DIN553-14H-SL-(A2K)-M12X10
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 10 mm |
Tip diameter (d2) | 3 mm |
Standards | DIN 553 |
Material | Steel |
Hardness category | 14H |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1.75 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hose clamp DIN 3017-1, shape A, W1, BASIC-Line
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
Storage basket 45°, set of 2
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Sleeve, reduced with female and male thread EN10242 M4, hot-dip galvanised malleable iron
Hydraulic trolley jack RH-6 With a robust frame construction and a load capacity of 6,000 kg
Mesh chevron
VARIFIX® Systemfix quick fastener With threaded rod
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
