Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
DIN 553 steel 14H zinc plated
SCR-CONEPT-DIN553-14H-SL-(A2K)-M3X12
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 12 mm |
Tip diameter (d2) | 0.3 mm |
Standards | DIN 553 |
Material | Steel |
Hardness category | 14H |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.5 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Last viewed
Subland stepped drill bit DIN 8374, RN-fine, 90°
Belt strap For aluminium ladders
Twist drill bit HSCo DIN 340 type RN OXIDE
Cetus work dungarees
Twist drill bit HSS DIN 1869 R2 type RN
Frame for VS TAL Larder wall cupboard full pull-outs
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
pias® drilling screw, raised countersunk head with AW drive
Modena S1 safety shoes
Cylindrical pin, unhardened ISO 2338 M6 A4 stainless steel plain