Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
DIN 553 steel 14H zinc plated
SCR-CONEPT-DIN553-14H-SL-(A2K)-M3X3
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 3 mm |
Tip diameter (d2) | 0.3 mm |
Standards | DIN 553 |
Material | Steel |
Hardness category | 14H |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.5 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Last viewed
Feather key, low profile DIN 6885, steel, plain, shape A
Work polo shirt HAKRO 215 ladies' long-sleeved polo shirt MIKRALINAR®
L-shaped four-way T-distributor
Drill bushing DIN 179, steel, plain, shape A
Hexagon nut DIN 934, A2 stainless steel, plain
UV 50 sun protection lotion
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Appliance connecting valve, 3/8" With non-return valve
UV 50 sun protection spray
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated