Slotted set screw with tip ISO 7434, steel 14H, plain
ISO 7434 steel 14H plain
SCR-CONEPT-ISO7434-14H-SL-M4X6
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 140 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 7434 replaces DIN 553 | There is some similarity | Nominal diameters for M1, M1.4 removed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 6 mm |
Tip diameter (d2) | 0.4 mm |
Standards | ISO 7434 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Construction product | 0 - not applicable |
EC declaration of conformity (CE) | 0 - not applicable |
Last viewed
Metal core drill bit Ruko 10815 solid carbide plain Weldon holder
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Synthetic protective glove Ejendals TEGERA® 801
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
Hexagon nut with left-hand thread DIN 934, steel I8I, plain
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain