Slotted set screw with tip ISO 7434, steel 14H, plain
ISO 7434 steel 14H plain
SCR-CONEPT-ISO7434-14H-SL-M4X8
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 140 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 7434 replaces DIN 553 | There is some similarity | Nominal diameters for M1, M1.4 removed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 8 mm |
Tip diameter (d2) | 0.4 mm |
Standards | ISO 7434 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Last viewed
Thermal protection
Shoulder screw with thread and slot
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Pocket slide calliper With bottom locking screw and round depth gauge
Solid carbide drill cutter Multi Performance
Sealing ring assortment DIN 7603 shape A 1,350 pieces in system case 4.4.1.
HSCo8 end mill, short DIN 844K
Work trousers
Jacket Planam Plaline
Solid carbide single-tooth cutter, plastic, right-hand cutting with left twist