Slotted set screw with tip ISO 7434, steel 14H, plain
ISO 7434 steel 14H plain
SCR-CONEPT-ISO7434-14H-SL-M6X30
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 140 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 7434 replaces DIN 553 | There is some similarity | Nominal diameters for M1, M1.4 removed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 30 mm |
Tip diameter (d2) | 1.5 mm |
Standards | ISO 7434 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Last viewed
Box-end plug-in torque wrench head drive Stahlwille 732aG/10
Spray gun For empty containers
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Hexagonal bolt with flange in accordance with MBN standard
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Jacket Planam Canvas 320
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Twist drill bit, metal Ruko DIN 338 type VA HSCo8 TiAlN
Intermediate layer for ISO P clamping system