Slotted set screw with tip ISO 7434, steel 14H, plain
ISO 7434 steel 14H plain
SCR-CONEPT-ISO7434-14H-SL-M6X8
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 140 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 7434 replaces DIN 553 | There is some similarity | Nominal diameters for M1, M1.4 removed.
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 8 mm |
Tip diameter (d2) | 1.5 mm |
Standards | ISO 7434 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Datasheets(X)
Last viewed
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Hexagonal bolt with thread up to the head
Wood screw Hexagon head DIN 571, A4 stainless steel
Hexagonal bolt with thread up to the head
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
TDS 247 thermal switch
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Neon high-visibility winter trousers, class 2
Low-cut safety shoes, S1P
Twist drill bit, metal Ruko DIN 338 HSS-G golden
