Slotted set screw with tip ISO 7434, steel 14H, zinc-plated, blue passivated (A2K)
ISO 7434 steel 14H, zinc plated
SCR-CONEPT-ISO7434-14H-SL-(A2K)-M12X50
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 140 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 7434 replaces DIN 553 | There is some similarity | Nominal diameters for M1, M1.4 removed.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 50 mm |
Tip diameter (d2) | 3.0 mm |
Standards | ISO 7434 |
Material | Steel |
Hardness category | 14H |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 1.75 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Shape of tip | Tip |
Last viewed
W-DSD insulation dowel with expansion nail
Cable grommet for standard cable connector box
Slotted flat-head screw DIN 85, A4-70 stainless steel, plain
Safety boots, S3
Three prong knob with perforated blank bushing Full hub
Connection cabinet W-A 250-A
Threaded rod
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank
Snap ring for bearing with ring groove
Hammer drill bit Max Quadro-L Vario