Slotted spring pin/clamping sleeve, heavy-duty design ISO 8752 spring steel, plain, with 3.1 certificate
ISO 8752 steel plain 3.1 certificate
Q/SPGPIN-ISO8752-6X20+3.1
Art.-no.
4955502960
EAN 4066782356403
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
- Fastening elements, similar use to grooved pins
- For use as screw and bolt sleeves, primarily where high shear forces occur
- Relieves stress on bolts and screws, which allows smaller sizes to be used
- 0.2-0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to drive into the hole
- The pins can be driven out again without damage
Notice
The drill hole diameter is the same as the nominal diameter (tolerance 12 H).
Product information
Datasheets(X)
 | |
Nominal diameter (d1) | 6.00 mm |
Length (l1) | 20.00 mm |
Material | Steel |
Surface | Plain |
Design | Heavy-duty design |
Last viewed
BASIC 8.8 system workshop trolley
Double bolt For cam lock nut
System workshop trolley BASIC 8.4
Push rod professional set
EAT 500 table extension
Low-cut safety shoes, S3
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
ORSY®BULL series 7 drawer box
Bucket
1C flat roof seal fleece inlay, pipe