Small combination top wedge
Combi top wedge small for terrace support
TERRACSPRT-TOPWEDGE-SMALL-80X43X19MM
Art.-no.
0907700104
EAN 4052703959891
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Professional solution for raised flooring and wooden decks.
- Optimum combination options with three sizes of top wedge and two base pieces
- Serrated surface enables precise and non-slip alignment in 0.5 mm increments (1 serration = 0.5 mm)
- Suitable for universal use
- Easy to cut, drill, nail, staple etc.
- Quick, precise height adjustment
- Quick installation of large areas of flooring for improved productivity
- Time-saving, super-quick, precision adjustment of correct support thickness in one step
- Enormous time savings guarantee productivity
- No laborious cutting of wedges
- Non-rotting, resistant to moisture, dry rot and decomposition
- Pressure tests conducted at alignment heights from 32-250 mm
- Verified service life of up to 75 years
- Free from plasticisers
Application area
Product information
Datasheets(X)
| Combination floor piece | Top wedge small | Top wedge medium | Top wedge large | Maximum point load | Bending stress in mm Point load (PL) with wedging 100 % 35 % | |||||
| Height | Height mm | Height mm | kg | kg | 100 kg | 150 kg | 200 kg | 250 kg | 300 kg | |
| 0 | 32 - 48 | 32 - 58 | 48 - 75 | 350 | 300 | 0.54/0.64 | 1.00/1.25 | 1.50/1.92 | 2.08/2.70 | 2.83/- |
| 1 | 67 - 83 | 67 - 93 | 83 - 110 | 350 | 300 | 0.69/0.82 | 1.25/1.60 | 1.86/2.52 | 2.63/3.67 | 3.69/- |
| 2 | 102 - 118 | 102 - 128 | 118 - 145 | 350 | 300 | 0.77/1.00 | 1.42/2.03 | 2.09/3.24 | 2.85/4.72 | 4.09/- |
| +3 | 137 - 153 | 137 - 163 | 153 - 180 | 350 | 300 | 0.99/1.12 | 1.74/2.17 | 2.50/3.44 | 3.43/4.98 | 4.73/- |
| 4 | 172 - 188 | 172 - 198 | 188 - 215 | 350 | 300 | 1.03/1.24 | 1.84/2.41 | 2.64/3.73 | 3.52/5.74 | 4.61/- |
| +5 | 207 - 223 | 207 - 233 | 223 - 250 | 350 | 300 | 1.08/1.42 | 1.99/2.81 | 2.93/4.34 | 4.01/6.30 | 5.42/- |
Last viewed
HSCo 90° green-ring countersink DIN 335C
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
EPS profile double cylinder
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Release tool For round connectors with locking lugs
Rear panel
1-component thick-film lacquer
OrgaAer partial extension
Washer and nut WN-810 steel plain
Pneumatic nailer DSN 160