Smoothing and filling filler, powder form

Name: Smoothing and filling filler, powder form
Brand: Würth
SKU: 089260016

Smoothing and putty powder form
FILR-(PLAN-AND-FILL)-5KG

Art.-no. 089260016

EAN 4058794351279

All versions

Specification

Polymer-modified and fibre-reinforced gypsum-based joint, filling and surface filler.

High adhesive strength for exemplary joint finishing with high resistance to cracking

Creamy silky consistency enables efficient, easy processing with quick strength development

High filling capacity

Excellent stability

Hardly any shrinkage in joints, slots, holes

Very easy to sand

Working time of approx. 50 minutes simplifies work

NoticeUse WÜRTH TG LF as a primer for the following painting and wallpapering work. Use only methylcellulose adhesives for wallpapering work. Always ensure good ventilation and fast drying including after wallpapering with paper and textured wallpapers, applying synthetic resin and cellulose plasters and after painting. The guidelines of plasterboard and
gypsum fibreboard manufacturers must be taken into account. Do not mix with foreign material. Site and weather conditions influence application. Do not apply material that has already started to harden. Processability in this case is not aided by stirring or adding water.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application areaThe smoothing and filling filler can be used as filler for plasterboard EN 520 and plasterboard products as well as fibre-reinforced plasterboard. Edge type HRE (half-rounded edge), HRFE (half-rounded flattened edge) and SE (sharp edge) can be filled (quality stages Q1-Q4). Prefabricated concrete part joints, slits and cavities can also be filled with the Würth smoothing and filling filler. Suitable for indoor use only.

InstructionsThe substrate must be free from dust, loose parts and any kind of contamination. Add 1 kg of smoothing and filling filler to 0.6 l of cool, clean water. After a soaking time of approx. 3 minutes, stir into a homogeneous paste.

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Featheredge, wooden handle

SRFSPTLA-B400MM

Art.-no. 0695942570

x 1 pcs

Featheredge, wooden handle

SRFSPTLA-B500MM

Art.-no. 0695942571

x 1 pcs

Featheredge, wooden handle

SRFSPTLA-B600MM

Art.-no. 0695942572

x 1 pcs

Featheredge, soft handle

SRFSPTLA-A2-SOFT-B170MM

Art.-no. 0695942590

Ideal for smoothing plaster or fillers

x 1 pcs

Featheredge, soft handle

SRFSPTLA-A2-SOFT-B285MM

Art.-no. 0695942591

Ideal for smoothing plaster or fillers

x 1 pcs

Fibreglass reinforcement strip

STR-FBRGLS-48MMX90M

Art.-no. 0992500001

For filling plasterboard and for bridging holes and cracks

Glass fibre fleece joint strip

STR-FBRGLS-FLEECE-50MMX25M

Art.-no. 0992500005

For filling and restoring cracks in indoor plaster and gypsum plasterboard panels

x 40 pcs

2-C smoothing trowel

SMOTHTRWL-SST-(2C-HNDL)-L280-W130-TH0,7

Art.-no. 5771011001

Rust-proof trowel with 2-C handle

Inside corner spatula

PLSTSPTLA-CEME-INEDGE-SST-WOHNDL-W80MM

Art.-no. 5771101200

For plastering inner corners

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).