Snap hook for rope system
Snap hook for rope system
ROPSYS-HORIZ-C659
Art.-no.
0838906659
EAN 4062856802500
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For safety harness system for installing on single anchor points with national technical approval
- Mounting on intermediate or end/corner support (only with 40/43 mm diameter) with national technical approval
- Continuous fall arrester on roofs and on/in buildings for ergonomic work
- Reduced force transmission to the structure through defined plastic deformation of the single anchor points in the event of a fall
- Resistant to corrosion and weathering: made of stainless steel (min. A2)
- 8 mm thick stainless steel cable (V4A)
- Steel snap hook oval with screw
Notice
- Observe the installation instructions and approval for the fasteners and single anchor point!
- The maximum number of people depends on the substructure and geometry (see national technical approval)
- Maximum rope length: 200 m
- National technical approval Z-14.9-866
- Also certified in accordance with DIN EN 795:2012 Type C (tests for deformation, static and dynamic strength and integrity) and CEN/TS 16415
Product information
Datasheets(X)
Application area
- Suitable for securing up to a maximum of 4 persons in conjunction with personal protective equipment against falling
- Installation possible on the roof, overhead and in buildings
- Installation possible on single anchor points with national technical approval, European Technical Assessment (ETA), approval in individual cases, general type approval, project-related type approval (Berlin) and measured rigid surfaces (steel, concrete components)
- Use in corrosion resistance class (CRC) II permitted
Length | 110 mm |
Material | Stainless steel A2 |
Colour | Stainless steel coloured |
Last viewed
Dowel pins
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Pan head tapping screws with recessed head ISO 7049, A2-70 stainless steel, plain
Counterbore Ruko subland twist drill "long" HSS DIN 8376 180°, quality grade: fine for through holes
Steel nail
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Low-cut safety shoes, S2
Screw with flattened half round head with hexagon socket, imperial
S3 safety boots Uvex asphaltpro
Hexagonal bolt with shank