Snap-on grommet
Snap-on bushing
SNAPSLEV-PA-BLACK-23,8X27,8X3,2MM
Register now and access more than 125,000 products
- Protects cables and hoses from damage caused by sharp edges
- For use in drilled and punched holes
- Simple, one-side push-on mounting
- Pull-out force of up to 155 N
- UL/CSA approved E15331
 | |
Internal diameter (d) | 23.8 mm |
Drill hole (D1) | 27.8 mm |
Outer diameter (D) | 30.9 mm |
Installation thickness (h1) | 3.2 mm |
Height (H) | 1.6 mm |
Min./max. installation thickness | 0.8-3.2 mm |
Colour | Black |
Material | PA 6.6 V-2 - Polyamide |
Silicone-free | Yes |
RoHS-compliant | Yes |
Min./max. temperature resistance | -35 to 85 °C |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Threaded rod with trapezoidal thread WN 976 with trapezoidal thread in accordance with DIN 103
Extractor hood WSA 125 for angle grinders
Extension hose Made of plastic for ISS and TSS series
T-shaped cutting ring fitting ISO 8434-1, stainless steel 1.4571
Flange tube for folding mobile scaffolding 75/180
DIN 34805-1 st 010.9 zinc flake silver TX
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Twist drill bit HSS DIN 1897 type RN
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
