Snap-on grommet
Snap-on bushing
SNAPSLEV-PA-BLACK-3,6X6,4X1,6MM
Register now and access more than 125,000 products
- Protects cables and hoses from damage caused by sharp edges
- For use in drilled and punched holes
- Simple, one-side push-on mounting
- Pull-out force of up to 155 N
- UL/CSA approved E15331
Datasheets(X)
 | |
Internal diameter (d) | 3.6 mm |
Drill hole (D1) | 6.4 mm |
Outer diameter (D) | 7.9 mm |
Installation thickness (h1) | 1.6 mm |
Height (H) | 1.6 mm |
Colour | Black |
Material | PA 6.6 V-2 - Polyamide |
Ultraviolet resistance | 0 - not applicable |
Silicone-free | Yes |
RoHS-compliant | Yes |
ISO | 0 - not applicable |
Min./max. temperature resistance | -35 to 85 °C |
Last viewed
HSS-Co5 end mill, short, triple blade, centre-cutting DIN 844K
Snap ring for bearing with ring groove
Cable tie KBL 2 black With plastic latch
FLEXEN® cold rubber continuous plate, self-adhesive
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Twist drill SC, WN 30, type N, internal cooling, TiAlN-UV
Nova Pro Scala H122 frame set
6-way splitter coupling For 12 V LED lights
Press tool holder For transmission jacks
Swivel arm "Single"