Snap ring for bearing with ring groove
DIN 5417 plain spring steel
SNAPRG-DIN5417-SP-D37,0
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
 | |
Type | SP 37 |
Suitable for shafts | 37 mm |
Suitable for groove diameter | 34.77 mm |
Internal diameter (d1) | 34 mm |
Slot width (e1) | 3 mm |
Width (b1) | 3.25 mm |
Thickness (s1) | 1.12 mm |
Standards | DIN 5417 |
Form | SP |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Tegera 11CVA welding gloves
Cement board screw For attaching cemented panels to metal substructures of up to 1 mm and to wooden substructures
Low-cut safety shoes S3
Retro-reflective warning marking Tank rear set
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Dry wall screw with coarse thread
Tapered pin with female thread, unhardened ISO 8736, steel, plain, type A (ground) unhardened
Safety boots, S2