Snap ring shape SW for shaft
Snap ring for shaft, plain steel
SNAPRG-SW-D360,0
Register now and access more than 125,000 products
Datasheets(X)
 | |
Type | AF 360 |
Suitable for shafts | 360 mm |
Suitable for groove diameter | 355 mm |
Internal diameter (d1) | 351.5 mm |
Width (b1) | 7.5 mm |
Thickness (s1) | 4 mm |
Standards | WN 490 |
Form | SW |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Grating/net sanding triangle Mirka Abranet
Sandpaper strip Useit® Superpad vehicle
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Pan head tapping screw, shape C with Z recessed head DIN 7981, A2 stainless steel, plain, PZ drive, shape C
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexagon nut with fine thread DIN 934, A2 stainless steel, plain
Twist drill bit HSCo DIN 338 type RN oxide
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain