Snipe nose pliers DIN ISO 5745
Snipe nose pliers ZEBRA DIN ISO 5745
SNPNOSEPLRS-40°-ANGL-L200MM
ZEBRA
Register now and access more than 125,000 products
- High-quality tool steel for long service life and precise gripping and cutting surfaces
- Elastic tips for high stresses, especially under bending forces
- Ergonomic and slip-free 2-component comfort handle with narrow collar profile for comfortable working and optimum force transfer
- Blades: Additional inductive hardening
- Surface: Entirely ground and chrome-plated
- Gripping surfaces: Toothed
- Joint: Lap joint
Datasheets(X)
 | |
Length (L) | 200 mm |
Length in inches (L) | 8-1/4 in |
Jaws length (L3) | 72 mm |
Jaws thickness (T1) | 9.5 mm |
Jaw-tips width (W4) | 4 mm |
Jaws width (W3) | 17.5 mm |
Jaw-tips thickness (T2) | 3 mm |
Surface | Chrome plated |
Material | Steel |
Material of handle | 2-component plastic |
Angle of jaws | 40 Degree |
Jaw design | Angled - 40° |
Last viewed
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Protective glove, fabric
Hexagon nut with clamping piece (all-metal) fine thread DIN 980, steel 8, zinc-plated, blue passivated (A2K)
3D hinge ∅ 20 mm
Dungarees
EPS profile thumbturn cylinder
Segmented construction site diamond cutting disc
T-piece, reduced with solder connection EN1254, copper, 5130R
Hexagon nut DIN 934, steel I6I/I8I, plain
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)