Snipe nose pliers DIN ISO 5745
Snipe nose pliers ZEBRA DIN ISO 5745
SNPNOSEPLRS-PHN-SR-L160MM
ZEBRA
Register now and access more than 125,000 products
- High-quality tool steel for long service life and precise gripping and cutting surfaces
- Elastic tips for high stresses, especially under bending forces
- Ergonomic and slip-free 2-component comfort handle with narrow collar profile for comfortable working and optimum force transfer
- Blades: Additional inductive hardening
- Surface: Entirely ground and chrome-plated
- Gripping surfaces: Toothed
- Joint: Lap joint
Datasheets(X)
 | |
Length (L) | 160 mm |
Length in inches (L) | 6-1/2 in |
Jaws length (L3) | 50 mm |
Jaws thickness (T1) | 9 mm |
Jaw-tips width (W4) | 3 mm |
Jaws width (W3) | 16.5 mm |
Jaw-tips thickness (T2) | 2.5 mm |
Surface | Chrome plated |
Material | Steel |
Material of handle | 2-component plastic |
Jaw design | Straight shape |
Last viewed
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Pan head tapping screw, shape C with AW drive
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Hexalobular screw with flattened half round head DIN 34805-1, TX drive, A2-070 stainless steel, plain
Blancolinus S single-lever mixer tap With swivel head and retractable spray head
Vulcanised fibre disc Klingspor CS 565
Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
Type WX brad nail, zinc-plated steel, blue passivated (A2K)
Work dungarees