Socket tester B
Electrical socket tester B
TEST-SOCKET-SAFETYCONTACT-230V/50HZ
Register now and access more than 125,000 products
- The safety socket is checked for possible installation errors such as swapped wires and interruptions
- The test result is visually displayed using three LEDs
- Power supplied by the outlet to be tested, no batteries required
- Compact, lightweight design
- Simple operation/handling
IEC/EN 61010-1 (DIN VDE 0411)
Before using the device, be sure to observe the safety instructions and warning notices in the operating instructions.
Datasheets(X)
For testing safety sockets, cable reels and extension leads etc.
Display | LED |
Min./max. voltage range AC | 220-240 V/AC |
Min./max. frequency | 50 / 60 Hz |
IP protection class | IP 40 |
Overvoltage protection category | CAT II/300 V |
Min./max. temperature conditions | 0 to 50 °C |
Material | ABS/PC |
Colour | Grey |
Last viewed
HSCo8 end mill, short, triple blade, centre-cutting DIN 844K
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Trough panel plug-in wall
T-handle 2-component hexagon drive
90° threaded elbow For Alu-Gewinde-WES aluminium pipe
Universal support, adjustable for heavy loads
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Hard foam insert For 1/2 inch socket wrench assortment
VDE replacement blade
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel