Welcome to Würth Aerospace Solutions For trade customers only

Soft PVC 1C liquid plastic primer

Primer soft PVC 1C liquid plastic
PRIM-LIQUIDPLASTIC-PVC-1LTR

Art.-no. 0838892556
EAN 4053479379814

Prices for customers after login
Soft PVC 1C liquid plastic primer

Art.-no. 0838892556

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Solvent-based 1-component primer for PVC substrates
  • Fast drying time approx. 20-30 min

  • Low consumption approx. 40-100 ml/m²

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For priming PVC substrates when applying the Würth 1C flat roof sealing products

Instructions

The substrate must be clean, dry and free from grease and oil. Observe the substrate table. Observe processing temperature of +10 to +35°C. Mask surfaces to be sealed in advance. Apply a thin layer of primer using a brush or roller. Wait for the drying time to elapse before applying the liquid plastic. Refer to the technical data sheet for more information.

Contents

1000 ml

Colour

Colourless

Chemical basis

Polyurethane

Viscosity/consistency

Liquid

Solvent-free

No

Min./max. processing temperature

10 to 35 °C

Can be further processed after min.

20 min

Further processing conditions

at 20°C

Weight of content

1.2 kg

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information